Publish Time:2024-01-18 Author:wangya Views:2182
When the switch is pressed, the internal spring generates pressure, causing the contacts to come into contact with the fixed contacts, thereby closing the circuit.
Read MorePublish Time:2023-11-09 Author:wangya Views:790
A tactile switch is a small electronic switch that opens or closes a circuit, usually by pressing a switch button.
Read MorePublish Time:2023-05-25 Author:linsen Views:1193
A good tact switch is also very important for the life of the entire product. For example, computer keyboards, remote controls, etc. If it is an inferior tact switch, the metal shrapnel will be fatigued and lost after frequent pressing. Elasticity fails.
Read MorePublish Time:2023-04-06 Author:jiaxi Views:1313
Current and voltage: When using a slide switch, attention needs to be paid to its rated current and voltage range to avoid damage to the switch due to overload or overvoltage. Different models of slide switches have different current and voltage ratings and need to be selected according to the specific application.
Read MorePublish Time:2023-04-03 Author:jiaxi Views:1024
Light touch switch is an electronic component switch that we often need to use in modern life, we often say that the four-foot light touch switch is on the switch has four feet, the use of this switch is very wide
Read MorePublish Time:2023-03-29 Author:jiaxi Views:942
The operating force of a tact switch is related to the condition of the reed. The opening force is proportional to the distance the reed is compressed. When the reed is compressed to 5% or 70%, the operating force suddenly decreases and is accompanied by a "ticking" sound.
Read MorePublish Time:2023-03-27 Author:jiaxi Views:905
Conductive slip ring, also known as collector ring, slip ring, collector ring, sink ring, rotary joint, rotary electrical interface, coil, commutator, adapter, is a precision power transmission device that realizes data, signal and power transmission of two opposing rotating structures. It belongs to the category of electrical contact sliding connection applications and is well suited for applications in unrestricted continuous rotation.
Read MorePublish Time:2023-03-23 Author:jiaxi Views:896
When installing lighted light touch switches, you must be cautious. If looseness occurs during welding, you must reinforce it in time to avoid falling off.
Read MorePublish Time:2023-03-21 Author:jiaxi Views:929
Since the conductive slip ring is mounted on the machine and equipment, it is a very high precision mechanical component and is the center of rotation for the entire system software. Therefore, special care must be taken when installing and connecting the conductors
Read MorePublish Time:2023-03-18 Author:jiaxi Views:912
conductive slip ring is an essential precision accessory for enterprise machinery and equipment, which affects the operation of equipment and product quality. In order to give full play to the role of slip rings and extend their service life, it is necessary to maintain them. The following is an introduction to the slip ring maintenance considerations.
Read MorePublish Time:2023-03-16 Author:jiaxi Views:916
Key switch mainly refers to the light touch key switch, also known as tact switch. Key switch is a kind of electronic switch, belongs to the electronic components category, first appeared in Japan (called: sensitive switch), use to meet the conditions of operating force to the switch operating direction pressure switch function closed on, when the withdrawal of pressure switch is off, its internal structure is to rely on metal shrapnel force changes to achieve on and off.
Read MorePublish Time:2023-03-14 Author:jiaxi Views:930
The slide switch base plate uses synthetic resins such as polycarbonate, so avoid exposing the potentiometer to ammonia, amines, alkali solutions, hydrocarbons, ketones, esters, halogens, etc. Hydrocarbons and other chemicals in a strong atmosphere.
Read MorePublish Time:2023-03-08 Author:jiaxi Views:978
light touch switch is also called key switch, English name: TOUCH SWITCH, TCAT SWITCH. generally referred to by its size: such as 6 * 6 * 5, is its length, width, height. It is a kind of electronic switch, which is different from the household wall switch.
Read MorePublish Time:2023-02-28 Author:jiaxi Views:1035
When soldering tact switches, some technicians often cause false solder and other problems due to improper operation, so how to prevent these false solder and other problems? First of all, we should apply some solder paste between the pins of the switch, after the four pins are coated, then each corner of the switch.
Read MorePublish Time:2023-02-21 Author:jiaxi Views:982
In the light contact switch welding, some technical personnel often due to improper operation leads to welding on the switch caused by false solder and other problems, then for how to prevent these false solder and other problems of the method?
Read MorePublish Time:2023-02-14 Author:mengyuan Views:1003
A conductive slip ring is an electromechanical component that can transmit current and data signals from a fixed device to a rotating device, also known as a conductive ring, collector ring, sink ring, brush, rotating electrical joint or electrical rotary head.
Read MorePublish Time:2023-02-14 Author:mengyuan Views:1089
Light tact switch, also called key switch, is a kind of electronic switch and belongs to the category of electronic components.
Read MorePublish Time:2023-02-13 Author:jiaxi Views:1088
when the withdrawal of pressure switch is off, its internal structure is to rely on the metal shrapnel force changes to achieve on and off.
Read More